HOME   About Us Infrastructure Quality Global Reach R & D    Circular Looms   FAQ's      Feedback      Contact      Sitemap           Events & Exhibition              Circular Looms     4 Shuttle Circular Looms /      6 Shuttle Circular Looms Extruder Tape Lines Cheese Winder Machine Sutli Winder Machine Circular Looms Lamination Tape Plant Printing machine Bale Press Textile Machinery Accessories Others   Model No. »    RW -04-24 RW-04-32 RW-06-30  Description Units Technical Specification  Working Width          (A) Double Flat * mm 350-650 350-850 350-850       Double Flat(Special  Version) mm 125-650 350-890 350-890  (B) Shuttles per machine nos 4 4 6  Capacity of Machine          (A) Weft insertion rate ppm 540-640 540-640 810-960  (B) Weft density cm 22-67/10 22-67/10 23-67/10  (C) Rotational Speed ** rpm 135-160 135-160 135-160  No. of Warp nos. 520 720 720  Weft Bobbin          (A) Max. Diameter mm 95 95 95  (B) Traverse Width  mm 200 200 200  (C) Bobbin inside dia mm 35 35 35  (D) Bobbin length mm 218 218 218  Warp Bobbin          (A) Max. Diameter mm 130 130 130  (B) Max. Traverse Width mm 200 200 200  (C) Bobbin inside dia mm 35 35 35  (D) Max. Bobbin length mm 210 210 210  Warp supply system†   Direct supply from Creel stand  Creel Capcaity†   520 720 720  Drive   Operating speed can be adjusted by changeable V-Pulley.  Stop Motion system    The stop Motion System operates as follows:  (A) Warp functioning in case of warp yarn breakage or extreme tension.  (B) Weft functioning in case of yarn breakage or before exhaust of weft package.  (C) Shuttle pushing force can be released by MAGNET TYPE PHOTO CELL when drive is stopped.  Cam   Special curved cam drum  Shedding Drive   Belt system  Shuttle Drive   Positive pushing by friction roller  Fabric Surface Winder  †    2 rollers surface winding driven by MAGNET DRIVE of 10 kg-cm (winding Tension can be adjustable)    Max. Diameter mm 1000 1000 1000  Electrical †             Main Motor kw 2.238 3.730 3.730    Fabric Winding Motor kw 0.37 0.37 0.37  Power Supply   3 Phase, 415 V, 50 Hz  Space required for  machine            Length mm 9000 9000 9000    Width mm 2800 2800 2800    Height mm 2900 2900 2900 Note : *   Width can be varied by replacement of optional Gauge Ring **  Depends on fabric size, construction and tape specificaiton †   This features are not avaialble in case of coversion of existing Circular Loom   Home  |  About us  |  Infrastructure  |  Quality Policy  | Global reach R & D  |  FAQ's  |  Feedback  |  Contact  |  Sitemap           ©2005 N-tex Engineering Works. All rights reserved. to top