| • |
Unwinder Unit
Mechanical clutch un-winder with facility of loading two fabric rolls at a time along with web aligner for preventing registration controlled in pneumatic trolley movement.
Web Aligner consists of :
(A) Oil Tank : 17 ltrs. (Capacity)
(B) Oil to be used : Servo 32 (Hydraulic)
(C) Motor : ½ H.P., 1440 R.P.M., 3 phase A.C.
(D) Line Pressure : 14 bar
(E) Hydraulic Pump : Gear Pump 3.4.1 / min. flow
(F) Follow up speed : 30 min / sec
Max at 3.4.1.1 / Min
(G) Air Sensor pressure : 5 to 28 m bar |
| • |
Printing Station
Four Printing Stations and each consisting of
(A) Analox Roller
(B) Ink Rubber Roller
(C) Stereo Drum
(D) Impression Roller
(E) Pinch Roller
(F) Ink Tray
Along with different types of free guide rollers.
Four Printing Stations :
Printing four colours one side, three colours on one side & one colour other side or two colours on each side.
Note :
Stereo thickness should be uniform size all over and should not exceed more than 6 mm in thickness.
Our printing stations also include 2 nos. of heavy duty exhaust fan & 2 Nos. of INFRARED LIGHTS of 1,600 watts. |
| • |
Differential
Differential consists of various parts to make lengthwise registration adjustments on the formal. Our units consist of 5 nos. of differentials, 4 Nos. of which are assembled of printing station wall and remaining one on cutting unit. |
| • |
Unlaminated Cutter
Consisting base frame with heavy MS plates firmly held by tie rod along with
(A) In feed rubber wheel
(B) Change Gear Unit
(C) Cutter assembly
(D) Conveyor Belt Assembly
(E) Shear Cutter Blade
(F) 1,500 Watt Heaters |
| • |
Main Drive and Panel
A.C. frequency variable Drive 7.5 HP, A.C. motor coupled with suitable gearbox. Temperature controller with thermocouple feed back for heating blades. |
| • |
Total Connecting Load : 20 HP |
